前两天有客户问小编，中空玻璃全自动打胶机出黑胶但是没有压力是怎么回事。小编看见之后迅速和提问者取得联系，帮助他了这个问题。小编想到还有很多人不知道这些问题的办法，就和大家也说说办法。
Two days ago, a customer asked Xiaobian, hollow glass automatic gluing machine out of black glue, but no pressure is how it is. Xiaobian quickly contacted the questioner and helped him solve the problem. Xiaobian thought that there were many people who did not know the solution to these problems, so he told everyone about the solution.
要检查一下打胶机的气源区间在不在0.6~0.8Mpa之间。这个如果没在调好之后再试一下。如果本来就在这个区间，进行下一个步骤：
First, check that the air source of the glue beater is between 0.6 and 0.8 Mpa. If it's not ready, try again. If it's already in this area, take the next step:
看看触屏中编辑功能菜单中的密封不使用选项是否打开；
See if the sealing option in the editing menu on the touch screen is turned on.
检查开关，气动开关是否阻塞；检查黑胶气动开关与电磁阀动作是否正常；
Check the switch, whether the pneumatic switch is blocked; check whether the black rubber pneumatic switch and solenoid valve operate normally;
检查一下中空玻璃自动打胶机比例泵上的智能压力表是否处在正常范围，7~35Mpa。
Check whether the intelligent pressure gauge on the proportional pump of the hollow glass automatic gluing machine is in the normal range, 7-35 Mpa.

检查打胶机上的液压站是否有压力，如果没有压力的话：（1）清洗比例溢流阀。（2）检查比例控制器是否正常通电又或者稍微松动。
Check whether there is pressure in the hydraulic station of the glue beater, if there is no pressure: (1) Clean the proportional relief valve. (2) Check whether the proportional controller is normally powered on or slightly loosened.
检查一组比例泵下限传感器是否有信号，检查二组比例泵是否有信号，后检查一下扫描仪数值是否正常。
Check whether the lower limit sensor of a group of proportional pumps has a signal, check whether the two groups of proportional pumps have a signal, and finally check whether the scanner value is normal.
经过这几个步骤，打胶机没有压力的问题应该就可以很好的得到！
After these steps, the glue machine without pressure should be able to solve the problem very well!
今天给大家介绍的内容就到这里了，相信以上的介绍能给大家带来一定的帮助，如果您对文章的内容还有不明白的地方，欢迎大家到全自动打胶机的网站留言讨论：http://linshi.jncsjx.com
This is the end of today's introduction. I believe that the above introduction can bring you some help. If you still don't understand the content of this article, you are welcome to leave a message on the official website of the automatic gluing machine for discussion: http://linshi.jncsjx.com.