中空玻璃自动打胶机常见故障分析
时间:2019-03-11 来源://www.qianyantong-e.com/ 发布人:昌盛机械
很多人在使用中空玻璃自动打胶机时出现了各种各样的问题。今天小编就给大家总结一下大家会经常遇到的几种问题和办法,希望对大家有所帮助。
Many people have various problems when they use hollow glass automatic gluing machine. Today, Xiaobian will give you a summary of several problems you will often encounter and solutions, hoping to help you.
,在给中空玻璃打胶时,可能会出现把胶挤出来的时候出现毛刺、或者不光滑、不平整的问题。发生这种情况的原因不外乎以下两种:
First of all, when gluing hollow glass, there may be burrs, or non-smooth and uneven problems when gluing out. There are no more than two reasons for this:
1.新购买的中空玻璃自动打胶机,先检查看看打胶机的出胶口是否是平整光滑。因为新机器可能会出现出胶口粗糙的情况,这时候就应该先把新机器出胶口打磨一下,等到平整、光滑了在试机器。
1. The newly purchased hollow glass automatic gluing machine, first check to see whether the gluing outlet of the gluing machine is smooth. Because the rubber outlet of the new machine may be rough, at this time we should first polish the rubber outlet of the new machine until it is smooth and smooth.
2.如果是已经使用很长时间的机器,可能是由于由于温度传感器不灵敏。导致实际的温度和显示的温度不相同,可以加试着在显示的温度的基础上,把温度往上调,直到能正常出胶为止
2. If the machine has been used for a long time, it may be because the temperature sensor is insensitive. As a result, the actual temperature and the display temperature are different, we can try to raise the temperature on the basis of the display temperature until the normal glue can be produced.
再一个问题就是:打胶中出现断胶的问题:
Another problem is the breakage of glue in gluing.
在使用中空玻璃自动打胶机打胶时,在打胶过程中很容易会出现断胶或者直接堵塞的现象。这有很大的可能是由于丁基胶不符合行业质量标准,杂质太多造成堵塞才造成的。所以我们要尽量使用符合行业标准的合格产品。
When the hollow glass automatic gluing machine is used for gluing, it is easy to break or directly block the glue in the gluing process. This is probably due to the butyl rubber does not meet the industry quality standards, too many impurities caused by blockage. So we should try our best to use qualified products that meet industry standards.
今天的精彩内容就给大家呈现到这里了,收藏我们的官网://www.qianyantong-e.com 济南昌盛机械,主营:双组份打胶机等等各机型的打胶机以及中空玻璃生产线,欢迎来电咨询。
Today's wonderful content is presented here. Collect our official website: //www.qianyantong-e.com Jinan Changsheng Machinery, main business: two-component gluing machine and hollow glass production line. Welcome to inquire.
- 介绍中空玻璃生产线的主要组成部分 2024/10/31
- 热熔胶涂布机的涂布控制系统的作用 2024/10/19
- 铝条丁基胶涂布机主要性能介绍 2024/10/16
- 中空玻璃设备生产线的实用性 2024/10/14
- 浅析中空玻璃丁基胶内溢及改善方法 2024/09/03
- 卧式丁基胶涂布机:浅析中空玻璃丁基胶内溢及改善方法 2024/09/02
- 中空玻璃打胶机的从属分类 2024/08/22
- 丁基胶涂布机升级设计的重要要素 2024/08/19
- 中空玻璃设备生产线要注意什么? 2024/08/15
- 式中空玻璃设备的自动化磨砂玻璃制造工艺 2024/08/12