双组份打胶机是完成中空玻璃二道密封的专用设备，在运用过程中可能会呈现形形色色的问题，济南双组份打胶机厂家的售后效劳人员，分离多年调试和客户实践消费的经历，对双组份打胶机在运用和维护方面总结了以下几点经历，整理成以下小文，希望可以协助进入中空玻璃加工行业的朋友。
Two-component glue beater is a special equipment to complete two-way sealing of hollow glass, which may present various problems in the operation process. After-sales service personnel of Jinan two-component glue beater manufacturer separated years of debugging and customer experience of practical consumption. The following experiences were summarized in the application and maintenance of two-component glue beater. The following articles were arranged in the hope of helping. Friends who enter the hollow glass processing industry.
1、胶盘压不下去
1. The disc can't press down.
①桶变形，不圆了，可用锤子把桶口敲圆，再压下去。
①桶变形，不圆了，可用锤子把桶口敲圆，再压下去。
②桶太小了，或是压盘密封圈过大，能够在密封圈上涂抹一点白胶，可起到光滑的作用再压下去。
The barrel is too small, or the pressure plate seal ring is too large, can be coated with a little white glue on the seal ring, can play a smooth role and then press down.
③恰当加大升降压力，待压入后恢恢复值。
(3) Increase the rising and falling pressure properly and restore the recovery value after the pressure is put in.
2、气泡问题（A组份有气泡或是混合后呈现气泡）
2. Bubble problem (bubbles in component A or bubbles after mixing)
①压胶时未能完整排尽空气，所以每次换胶时，一定要把排空气的阀门翻开，等空气排完后再打开。
When pressing the glue, the air can not be exhausted completely, so every time the glue is changed, the valve of the exhaust air must be turned open, and then open after the air is exhausted.
②手动混胶过程中混入空气。
(2) Air is mixed in the process of manual mixing.

3、混合不平均后胶发灰，泛蓝的缘由
3. Reasons for blueness and grey hair after uneven mixing
①参加的B组份量缺乏，加大B组份的量，将比例尺向小的数字方向调→（9，8，7，6）。
(1) Lack of B component, increase the number of B component, and adjust the scale to small digital direction (9, 8, 7, 6).
②B组份在运用时要用棍子悄悄搅拌一下。由于B组份在出厂时，上面都会放一小层硅油，以防桶盖不严实时漏气进去，B组份固化结壳。
(2) Component B should be stirred quietly with a stick when it is used. As component B is out of the factory, a small layer of silicone oil will be put on it to prevent the lid from leaking in real time, and component B solidifies the crust.
③A组份里用的纳米钙白度高，所以和黑胶混合后发灰，泛蓝，但胶的性能不会遭到影响。由于双组份胶做成一个白的和一个黑的，目的就是为了看到混合过程有没有混合平均。
(3) The nano-calcium used in component A has high whiteness, so when mixed with black glue, it will be grey and bluish, but the properties of the glue will not be affected. Because the two-component glue is made into a white one and a black one, the purpose is to see whether the mixing process has an average mixing.
以上由济南双组份打胶机厂家提供给大家的精彩内容就到这里了！如果大家有相关的业务问题，欢迎咨询我们官网的客服人员：//www.qianyantong-e.com！谢谢支持！
Above by Jinan two-component glue machine manufacturer to provide you with wonderful content here! If you have relevant business problems, please consult our customer service staff on the official website: //www.qianyantong-e.com! Thank you for your support!