气动控制技术是由空气压缩机的气体压缩是强大的压力,使其有很高的压力和动力了,在一个密封的使用胶水关注技术,不锈钢主要用于约束和胶水点胶阀、气动控制技术已经成为现在一点橡胶工业成为缺乏技术的之一。
　　Pneumatic control technology is made by the air compressor, which is a powerful pressure, so it has a high pressure and power. In a sealed use of glue attention technology, stainless steel is mainly used for constraint and glue dispensing valve, pneumatic control technology has become one of the key points in the rubber industry which is lack of technology.
　　电动与气动差距
　　Price gap between electric and pneumatic
　　密封在传感器中的应用点胶水,胶水用于不锈钢点胶阀配件,所以如何使点胶阀与双动可以实现回吸,与气动控制技术,当然,有些人想知道为什么不使用电动产品,也有电点胶阀,气动点胶阀无非是的两倍或三倍,甚更高,不划算的使用在工业上,只有采用气压控制技术，才能使气动调剂阀与电动调剂阀相媲美。
　　The application point glue of sealing in sensor, glue is used for stainless steel point glue valve accessories, so how to make the point glue valve and double acting can realize the suction, and pneumatic control technology, of course, some people want to know why not use electric products, but also have electric point glue valve, pneumatic point glue valve is no more than twice or three times of the price, or even higher, the rate of return is not cost-effective in industry, only using pneumatic control Only by using this technology can the pneumatic regulating valve be compared with the electric regulating valve.
　　a - y6调剂控制器
　　A - y6 regulating controller
　　分配阀实现吸、再作用和空气压力
　　Distribution valve to achieve suction, reaction and air pressure
　　不锈钢点胶阀与双动可以实现回吸,与气弹簧有直接的关系,气弹簧可以实现按照范围伸展和收缩的压力,适度的压力直接侵入改变弹簧秤,这样我们可以使不锈钢粘回吸入阀和双动,这时每个泰国密封胶机城市空气压力控制装置,可防止密封不好,也可以回吸和双代，一举两得。
　　The stainless steel dispensing valve and double acting can realize the suction, which has a direct relationship with the air spring. The air spring can realize the pressure of expansion and contraction according to the range, and the moderate pressure directly invades and changes the spring scale, so that we can make the stainless steel stick back to the suction valve and double acting. At this time, the air pressure control device of each Thai sealant machine can prevent the bad sealing, and can also recycle and double acting. Two gains.

　　气动控制装置类型
　　Type of pneumatic control device
　　遵循一个取之不尽的提升点胶机生产技术、气动控制技术逐渐成熟,孤独的压力控制设备生产新太,像一个982点胶控制装置,控制装置983年和800年的控制装置,装置916蠕变约束等,基础工业生产用于约束设备,气动控制技术是一项成熟的技术,密封的环境也逐渐减少。
　　Following an inexhaustible improvement of dispensing machine production technology and pneumatic control technology, the lonely pressure control equipment production Xintai, like a 982 dispensing control device, the control device of 983 and 800 years, device 916 creep restraint, etc., the basic industrial production is used for restraint equipment, pneumatic control technology is a mature technology, and the sealed environment is gradually reduced.
　　日常维护，确保设备的正常运行
　　Daily maintenance to ensure the normal operation of the equipment
　　只有在密封的使用点胶机根据仿表操作的使用,每日不锈钢阀门维修和测试密封,测试气弹簧可伸缩性、等,生产基地将不存在问题,空气压力控制技术相对成熟,很少会出现空气压力造成的分配不能提交。
　　Only in the use of sealing dispenser according to the use of table imitating operation, daily maintenance and test of stainless steel valve sealing, test of gas spring scalability, etc., there will be no problems in the production base, the air pressure control technology is relatively mature, and rarely the distribution caused by air pressure can not be submitted.
　　如果您还想了解更多关于双组份打胶机的信息可关注我们的网站//www.qianyantong-e.com，也可直接与我们联系，我们会为您提供更贴心的服务。
　　If you want to know more about the two-component dispenser, you can follow our website //www.qianyantong-e.com or contact us directly. We will provide you with the most intimate service.