双打胶胶机、点胶机的清洗方法
Cleaning method for doubles glue dispenser and dispensing machine
电子工业的迅速发展，以及人力资源成本的不断上升，越来越多的企业选择自动化作业方式，一方面成本较低，另一方面机器作业，品质一致性强，产品的合格率比较高，另外有好多作业，其精度要求太高，手工是无法去完成的。
With the rapid development of the electronic industry and the rising cost of human resources, more and more enterprises choose the automatic operation mode. On the one hand, the cost is lower, on the other hand, the machine operation has a strong consistency in quality, the qualified rate of products is higher, on the other hand, there are many operations, which require too high precision, and manual work can not be completed. Yes.
在电子，LED光电，五金，塑胶等行业，点胶机，灌胶机被越来越多的客户所使用。
In the electronics, LED photoelectric, hardware, plastic and other industries, dispensing machine, filling machine is used by more and more customers.
很多客户在初次使用后，都有问到点胶机，灌胶机的清洗问题。不知道怎么去清洗，在这里我们就做一下简单的讲解。如果是带自动清洗的点胶机，灌胶机，那操作起来就相当简 单了，只需按一下操作面板上的清洗按钮，机器就会自动的去完成。如果机器不带自动清洗功能，那么一般如何去清洗呢。
Many customers, after their initial use, have asked about the cleaning of dispensing machines and glue dispensers. I don't know how to clean it. Here we will give a brief explanation. If it is a dispensing machine with automatic cleaning, filling machine, then the operation is quite simple, just press the cleaning button on the operation panel, the machine will automatically complete. If the machine does not have automatic cleaning function, how do we usually clean it?

看胶水的性质。如果单液的胶水，而且在常温不是很容易固化的胶水，那么每次点完或者灌完产品后，下次所用到的胶水还是相同时，可以不考虑清洗问题。如果是厌氧胶、快干胶类似于，这样的胶水或者类似硅胶之类的常温下会比较快固化的胶水，那么是要清洗的。清洗的时候，先将没用完的胶水排完，然后将有机溶剂，如天那水、工业酒精，放到机器里面。然后将这些有机溶剂和胶水一起压出来，再用气枪吹开即可。用此类型的机器，清洗是十分必要的，否则的话，胶水固化在胶阀中，或者是料桶中就很麻烦，可能有些配件就要更换了，所以每次用完后，一定要记得清洗。
Look at the nature of glue. If a single solution of glue, and at room temperature is not easy to solidify the glue, then every time after the point or filling the product, the next time the glue used is the same, can not consider the cleaning problem. If it is anaerobic glue, quick-drying glue similar, such glue or similar to silica gel at room temperature will be faster curing glue, then it is to clean. When cleaning, the unused glue is discharged, and then organic solvents, such as Tiannashui and industrial alcohol, are put into the machine. The organic solvents and glue are then pressed together and blown off by an air gun. With this type of machine, cleaning is very necessary, otherwise, glue solidification in the glue valve, or the barrel is very troublesome, may have some parts to be replaced, so every time after use, must remember to clean.
如果选择东莞久耐机械双组份胶水的灌胶机，那么清洗就比较简单了，设备都带有自动清洗功能，工作完成后将灌胶机前面的白色混合管拆下来放到有机溶剂里面浸泡一下即可，或者换一根混合管。
If you choose Dongguan Durable mechanical two-component glue filling machine, then cleaning is relatively simple, equipment with automatic cleaning function, after the completion of the work will be the filling machine in front of the white mixing pipe down into the organic solvent soak, or replace a mixing pipe.
济南昌盛机械，对双组份打胶机感兴趣的朋友可以关注我们http://linshi.jncsjx.com，敬请期待更多精彩内容
Jinan Changsheng Machinery, friends interested in two-component glue beater can pay attention to our http://linshi.jncsjx.com, please look forward to more exciting content