打胶机的日常保养你懂得多少
How much do you know about the daily maintenance of the glue machine?
1.首要我们要清楚的是打胶机是一个看上去体型较大，可是里边十分精密的东西。所以为了能让它坚持更好的状况，日常的保护和保养必定是必不可少的。
1. The first thing we need to know is that the gluer is a very sophisticated thing that looks big. Therefore, in order to make it stick to better conditions, routine protection and maintenance must be essential.
2.根本的每天清洁必定要做到，每天把作业台面进行整理，能够用柔软的布擦一下，坚持整齐，确保传感器能正常辨认。
2. Fundamental daily cleaning must be done, every day to clean the work table, can wipe with a soft cloth, adhere to neatness, to ensure that the sensor can be recognized properly.
3.下班之前承认里边还有没有胶，要把胶排顺利。还有一个就是查看看看胶枪是否阻塞，假如阻塞及时整理，有利于问题的及时处理。
3. before you go to work, admit that there is still no glue inside. Another is to check to see if the rubber gun is blocked. If the blockage is sorted out in time, it is conducive to the timely handling of the problem.
4.为了避免密封圈老化、变形，能够守时用硅油对打胶机进行清洗保养，这样能更好的延伸密封圈的使用寿命。
4. In order to avoid the aging and deformation of the sealing ring, the rubber beater can be cleaned and maintained with silicone oil on time, which can better extend the service life of the sealing ring.
5.牢记的是不要作业人员自己随意调理压力表等，那样或许会影响胶，会形成打胶质量和设备问题。
5. Keep in mind that the operator should not adjust the pressure gauge at will, which may affect the glue, the quality of the glue and equipment problems.
6.要守时查看打胶机上面螺丝是否松动，接头有没有漏气现象。假如一旦发现问题及时上报，及时修理，确保生产和问题。
6. watch the time to see whether the screw on the gluing machine is loose, and whether there is any leakage in the connector. If the problem is reported in time, timely repair should be made to ensure production and safety.

7.在换胶进程中必定要细心，要把里边的空气排洁净，不然里边的硅胶固话设备很简单损坏，也很影响打胶质量。
7. In the process of changing glue, care must be taken to clean the air inside. Otherwise, the silica gel fixed-line telephone equipment inside will be easily damaged, which will also affect the quality of gelatinizing.
8.现在小编能想到的只要这么多了，假如我们还想起了一些关于打胶机保养问题，欢迎我们和小编一起来评论。
8. Now Xiaobian can think of as long as so many, if we also think of some problems about glue machine maintenance, welcome to comment with Xiaobian.
9.冲刷混胶器或许胶嘴时，必定要记得把胶嘴里边的胶放出来用接胶板接住，以免污染设备。
9. When flushing the rubber mixer or the rubber nozzle, it is necessary to remember to release the glue inside the rubber nozzle and catch it with a splice board so as to avoid contaminating the equipment.
10.操作参数时，必定要根据需求的尺度来设定数值，不要自己随意的设定，避免操控器发出错误信息，损坏设备。
10. When operating parameters, it is necessary to set the values according to the scale of the demand. Do not set them arbitrarily by yourself, so as to avoid the misinformation from the controller and damage the equipment.
11.在打胶时必定不要松懈哦，要扶好玻璃。避免玻璃脱位，即影响漂亮又影响打胶质量。
11. do not slacken when making glue. Avoid glass dislocations, that is, affect the beautiful and affect the quality of glue.
12.在冲刷胶嘴、混胶器时，必定要先翻开胶嘴操控阀门，然后在翻开供胶机，避免因压力剧增损坏设备或许呈现事故。
12. When flushing rubber nozzles and mixers, it is necessary to turn on the rubber nozzle control valve first, and then turn on the rubber feeder, so as to avoid the equipment damage caused by the sharp increase of pressure or safety accidents.
13.在机头前方检测玻璃开关的光眼上不被胶堵住，一旦堵住会耽误作业。
13. Inspecting the glass switch in front of the nose is not blocked by glue. Once blocked, it will definitely delay the operation.
14.剩下的就是在日常作业中需求留意的一些小的点，可是仍是不能掉以轻心。比方，在胶嘴和两边的刮胶板上假如胶比较多时，要及时整理洁净。
14. What remains is some small points that need to be noticed in daily work, but still can not be taken lightly. For example, if the glue is on the gum and the scraping boards on both sides, it should be cleaned in time.
15.吸盘上不要放杂物，一起要及时整理。要不或许呈现问题都找不着人来修了呢。
15. do not put litter on the sucker. Or you can't find anyone to fix it.
综上所述有济南昌盛机械提供，想了解更多双组份打胶机知识，欢迎关注我们的网站：http://linshi.jncsjx.com谢谢支持！
In summary, all the above-mentioned Jinan Changsheng Machinery provides, want to know more about the two-component glue machine knowledge, welcome to pay attention to our website: http://linshi.jncsjx.com Thank you for your support!